标签归档：默克

SSWP04700-Merck Millipore默克密理博3um混合纤维素滤膜142mm直径SSWP14250

发表于由

【简单介绍】

Merck Millipore默克密理博3um混合纤维素滤膜142mm直径SSWP14250，醋酸纤维素和硝酸纤维素的混合物不具有生物活性，使 MF-Millipore 表面滤膜成为分析和研究应用中Z广为使用的膜之一。 不含 Triton 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂，其水溶出物比标准的 MF-Millipore 滤膜低。

【详细说明】

Merck Millipore默克密理博3um混合纤维素滤膜142mm直径SSWP14250
Merck Millipore默克密理博3um混合纤维素滤膜142mm直径SSWP14250介绍：醋酸纤维素和硝酸纤维素的混合物不具有生物活性，使 MF-Millipore 表面滤膜成为分析和研究应用中zui广为使用的膜之一。 不含 Triton 表面活性剂的 MF-Millipore 滤膜包含极少量的润湿剂，其水溶出物比标准的 MF-Millipore 滤膜低。

说明:MF-Millipore 表面滤膜，混合纤维素酯，亲水，3.0 µm，142mm，白色，光面

商标名:MF-Millipore

数量/包装:50

滤膜材质:Mixed Cellulose Esters

滤膜商标名:MF-Millipore

折射率:1.495

水通量，mL/min x cm2:320

23 °C 时的泡点:≥0.7 bar

zui高操作温度，°C:75

可润湿性:亲水

滤膜直径，mm:142

滤膜代码:SSWP

滤膜颜色:白色

产品名称:MF-Millipore 表面滤膜

滤膜表面:光面

重量分析溶出物，%:6

厚度，µm:180

空气流速，L/min x cm2:30

孔隙率 %:83

PLGC04710-Merck Millipore默克密理博再生纤维素10KD超滤膜PLGC04710

发表于由

【简单介绍】

Merck Millipore默克密理博再生纤维素10KD超滤膜PLGC04710，要对稀释溶液进行浓缩或脱盐，请使用 Ultracel 再生纤维素膜。 超滤膜的亲水性、致密微孔结构对蛋白质、DNA 或其它大分子具有Z低的吸附率，从而保证了Z高的截留率。

【详细说明】

Merck Millipore默克密理博再生纤维素10KD超滤膜PLGC04710

要对稀释溶液进行浓缩或脱盐，请使用 Ultracel 再生纤维素膜。 超滤膜的亲水性、致密微孔结构对蛋白质、DNA 或其它大分子具有zui低的吸附率，从而保证了zui高的截留率。

 

Merck Millipore默克密理博再生纤维素10KD超滤膜PLGC04710技术参数

化学 主要应用 过滤器直径 (?) NMWL
Regenerated Cellulose (RC) Protein Purification, Protein Desalting, Protein Concentration 47 mm 10 kDa
描述 
产品目录编号 PLGC04710
商名
  • Ultracel
描述 Ultracel PLGC 圆片型超滤膜，再生纤维素，10 kDa NMWL，47 mm
产品信息 
Device Configuration Ultrafiltration Discs
过滤器代码 PLGC
过滤器类型 超滤膜
NMWL 10 kDa
应用 
应用 These Ultrafiltration Membrane Discs enable purification of proteins with a membrane NMWL of 10 kDa. Use Ultracel regenerated cellulose membranes to concentrate or desalt dilute solutions.
主要应用
  • Protein Purification
  • Protein Desalting
  • Protein Concentration
生物信息 
媒质 Ultracel®
尺寸 
过滤面积 17.3 cm²
过滤器直径 (?) 47 mm
材料信息 
化学
  • Regenerated Cellulose (RC)
包装信息 
数量 10

1.10426.0500-Merck默克Chromocult色质大肠菌群培养基

发表于由

【简单介绍】

品牌 其他品牌 级别 其他

Merck默克Chromocult色质大肠菌群培养基，Merck默克Chromocult Coliform Agar色质大肠菌群培养基1.10426.0500，500克/瓶。颗粒状脱水培养基，首先将培养基的各组分混合均匀成粉末状，再经过*的颗粒化过程，最后脱水而制成。颗粒状培养基为实验安全和产品质量带来很多的好处。1.15525.0001：林格氏液试剂

【详细说明】

Merck默克Chromocult色质大肠菌群培养基

Merck默克Chromocult Coliform Agar色质大肠菌群培养基1.10426.0500

500克/瓶。颗粒状脱水培养基，首先将培养基的各组分混合均匀成粉末状，再经过*的颗粒化过程，最后脱水而制成。颗粒状培养基为实验安全和产品质量带来很多的好处。

防止组分分离和结块，组分分布均匀稳定，重现性好。容易称量，良好的流动性防止粘壁。快速均匀的溶解于水。

1.05463.0500：平板计数培养基 , 总菌数 培养基( PCA )，Casein-peptone glucose yeast extract agar for microbiology GranuCult,500克/瓶

1.10426.0500：Chromocult大肠菌群培养基（CCA）Chromocult Coliform Agar,500克/瓶

1.00850.0500：色质大肠菌/大肠菌群加强选择性培养基，Chromocult Coliform Agar ES,500克/瓶

1.07228.0500：GranuCult缓冲蛋白胨水培养基,500克/瓶

1.10582.0500：GranuCult氯化钠蛋白胨肉汤培养基,500克/瓶

1.05459.0500：胰酪大豆液体培养基，Tryptic Soy Broth ( TSB ) – CASO Broth,500克/瓶

1.05458.0500：GranuCul胰酪大豆胨琼脂培养基Casein-peptone soymeal-peptone agar,500克/瓶

1.05438.0500：萨氏葡萄糖琼脂培养基( SDA)，SABOURAUD-4 % Dextrose Agar,    500克/瓶

1.05396.0500：麦康凯肉汤培养基MacCONKEY Broth,    500克/瓶

1.05404.0500：甘露糖醇酚红培养基,    500克/瓶

1.08339.0500：沙氏2％葡萄糖琼脂培养基,    500克/瓶

1.05404.0500：甘露糖醇酚红培养基,    500克/瓶

1.05403.0500：肠内杆菌培养基( MOSSEL )Enterobacteriaceae Enrichment Broth Mossel,    500克/瓶

1.05284.0500：绿脓杆菌培养基Pseudomonas selective agar base,    500克/瓶

1.05287.0500：木糖赖氨酸脱氧胆盐培养基Xylose lysine deoxycholate agar,    500克/瓶

1.05290.0500：木糖赖氨酸脱氧胆盐培养基Xylose-lysine-deoxycholate agar ,    500克/瓶

1.07666.0500：RVS沙门氏富集肉汤培养基Rappaport Vassiliadis Salmonella Enrichment Broth,    500克/瓶

1.10275.0500：GranuCult VRBD培养基Crystal-violet neutral-red bile glucose agar acc. to MOSSEL,    500克/瓶

1.00416.0500：R2A 培养基,    500克/瓶

1.08191.0500：GranuCult1.10426.0500-Merck默克Chromocult色质大肠菌群培养基硫乙醇酸盐培养基  ,    500克/瓶

1.10582.0500：GranuCult氯化钠蛋白胨肉汤培养基,    500克/瓶

1.46196.0100：缓冲氯化钠蛋白胨培养基,    500克/瓶

1.07324.0500：胰酪大豆胨琼脂培养基（含中和剂）

1.15525.0001：林格氏液试剂

Merck默克Chromocult色质大肠菌群培养基



CVGL72TP3 CTGR71TP1-默克Millipore密理博Durapore滤芯CVHL72TP3

发表于由

【简单介绍】

品牌 其他品牌

默克Millipore密理博Durapore滤芯CVHL72TP3 CVGL72TP3 CTGR71TP1，有效去除胶体和颗粒污染物。Durapore滤芯在制造过程中进行了100%的完整性测试，以确保完整性。Durapore亲水滤芯由聚偏氟乙烯（PVDF）膜与纤维素酯（RW06）预过滤层制造，更大的通量和聚丙烯组件，广泛的化学相容性。

【详细说明】

默克Millipore密理博Durapore滤芯CVHL72TP3 CVGL72TP3 CTGR71TP1

有效去除胶体和颗粒污染物。Durapore滤芯在制造过程中进行了100%的完整性测试，以确保完整性。Durapore亲水滤芯由聚偏氟乙烯(PVDF)膜与纤维素酯(RW06)预过滤层制造，更大的通量和聚丙烯组件，广泛的化学相容性。

Description
Catalogue Number CVHL72TP3
Trade Name

  • Durapore®
Description Durapore® Cartridge Filter with prefilter 20 in. 0.45 µm Code 7

Product Information
Device Configuration Cartridge
Maximum Differential Pressure, bar (psid) Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C
Cartridge Code Code 7 (2-226) O-rings w/locking-tabs
Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Prefilter Material Mixed Cellulose Esters (MCE)
Quality Level MQ400

Biological Information
Bacterial Endotoxins Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media Durapore® w/Prefilter
Sterility Other
Sterilization 10 SIP cycles of 30 min or 10 autoclave cycles of 60 min @ 121 °C
Wettability Hydrophilic

Physicochemical Information
Pore Size 0.45 µm
Air Diffusion at 23 °C ≤30 mL/min @ 1.5 bar (22 psig) in water
Bubble Point at 23 °C ≥1930 mbar (28 psig) air with water
Gravimetric Extractables The extractables level was equal to or less than 45 mg per 10-inch cartridge after 24 hours in water at controlled room temperature.
Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food.
Non-Fiber Releasing This product was manufactured with a Durapore® membrane which meets the criteria for a “non-fiber releasing” filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Dimensions
Cartridge Nominal Length 20 in. (50 cm)
Diameter 6.9 cm (2.7 in.)
Filtration Area 1.38 m²
Device Size 20 in.

Materials Information
Chemistry

  • Polyvinylidene Fluoride (PVDF)
Device Material

  • Polypropylene
Seal Material Silicone (SI)
Support Material Polypropylene

Packaging Information
Material Size 3
Material Package Double Easy-Open bag

Specifications
Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L

规格

OptiScale® and Millipak® Capsules
OptiScale® 25 Capsules OptiScale® 47 Capsules Millipak® 100 Millipak® 200
Nominal Dimensions
Maximum length: 39 mm (1.52 in.) with female Luer-Lok inlet/male Luer-Lok outlet 82 mm (3.24 in.) with flange inlet/hose barb outlet
74 mm (2.91 in.) with flange inlet/flange outlet
94 mm (3.70 in.) with hose barb inlet/hose barb outlet		 13 cm (5.1 in.) 15.5 cm (6.1 in.)
Diameter: 31 mm (1.21 in) 69 mm (2.75 in.) 7.6 cm (3.0 in.)
Weight: 0.19 oz (5.5 g) 2.3 oz (67 g) — —
Filtration Area 3.5 cm² 17.7 cm² 500 cm² (0.54 ft²) 1000 cm² (1.08 ft²)
Materials of Construction
Filter membrane: Hydrophilic polyvinylidene fluoride (PVDF)
Structural components: Polypropylene Polycarbonate
Supports: Polypropylene Polycarbonate
Vent caps: Polypropylene Polyvinylidene fluoride (PVDF)
Internal seal rings: Fluoroelastomers —
Housing Vent Capped Vent with female Luer connections on inlet side of device. Adjustable vent with male luer and female Luer-Lok connections on inlet side of device.
Maximum Inlet Pressure 4.1 bar (60 psig) at 25 °C 5.5 bar (80 psig) at 25 °C 5.2 bar (75 psig) at 25 °C
Maximum Differential Pressure
Forward: 4.1 bar (60 psig) at 25 °C 5.5 bar (80 psig) at 25 °C 4.1 bar (60 psid) at 25 °C
1.7 bar (25 psid) at 80 °C
345 mbar (5 psid) at 123 °C
Reverse: 0 bar (0 psig) 0.7 bar (10 psig) at 25 °C 690 mbar (10 psid) at 25 °C
Bubble Point at 23 °C — — ≥ 1790 mbar (26 psig) air with water
Gravimetric Extractables — — After autoclaving and a 24-hour soak in ASTM Type 1 reagent grade water at controlled room temperature:
≤ 2.5 mg ≤ 5.0 mg
Bacterial Endotoxin Aqueous extraction contains — Aqueous extraction contains
Oxidizable Substances — Meets the requirements of the USP Oxidizable Substance Test after a water flush of:
≤ 100 mL 200 mL 200 mL
TOC/Conductivity This product exhibited less than 500 ppb TOC per USP<643>and less than 1.3 µS per USP<645>after autoclave and a WFI water flush of 15 mL. —
Sterilization May be autoclaved for 1 cycle of 60 minutes at 123 °C May be autoclaved for 3 cycles of 60 minutes at 126 °C May be autoclaved for 3 cycles of 90 minutes at 123 °C. Capable of 45 kilogray (4.5 Megarad) gamma exposure (cannot be steam sterilized in-line).
Good Manufacturing Practices These products are manufactured in a Millipore facility which adheres to FDA Device Good Manufacturing Practices.
Non-Fiber Releasing Durapore membrane meets the criteria for a “non-fiber releasing” filter as defined in 21 CFR 210.3 (b) (6).
Component Material Toxicity Component materials meet the requirements of USP<88>Reactivity Test for Class VI Plastics. This product is non-toxic per the current USP<88>Safety Test.
Indirect Food Additive The Durapore membrane used in these products meets the FDA Indirect Food Additive requirements cited in 21 CFR 177.2910. All other components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177 – 182.
Opticap® XL Capsules and Cartridge Filters
Opticap® XL 2 Opticap® XL 4 Opticap® XL 5 Opticap® XL 10 Cartridge (per 10-inch element)
Nominal Dimensions
Maximum length: 14.2 cm (5.6 in.) 19.6 cm (7.7 in.) 21.6 cm (8.5 in.) 33.5 cm (13.2 in.) —
Diameter: 8.4 cm (3.3 in.) 10.7 cm (4.2 in.) 6.9 cm (2.7 in.)
Filtration Area 0.09 m² (0.93 ft²) 0.19 m² (2.09 ft²) 0.35 m² (3.7 ft²) 0.69 m² (7.4 ft²)
Materials of Construction
Filter membrane: Hydrophilic PVDF
Prefilter media: Mixed esters of cellulose
Film edge: — Polypropylene
Structural components: Polypropylene
Supports: Polypropylene
Vent O-rings: Silicone —
O-rings: — Silicone
Vent/Drain ¼ in. hose barb with double O-ring seal —
Maximum Inlet Pressure 5.5 bar (80 psi) at 23 °C
2.8 bar (40 psi) at 60 °C
1.0 bar (15 psi) at 80 °C
Maximum Differential Pressure
Forward: 5.5 bar (80 psid) at 25 °C (with prefilter)
1.0 bar (15 psid) at 80 °C (with prefilter)
3.4 bar (50 psid) at 25 °C (without prefilter)		 5.5 bar (80 psid) at 25 °C
1.8 bar (25 psid) at 80 °C
345 mbar (5 psid) at 135 °C
Reverse: 3.4 bar (50 psid) at 25 °C, intermittent 3.5 bar (50 psid) at 25 °C, intermittent
Bubble Point at 23 °C ≥ 1930 mbar (28 psig) air with water
Air Diffusion Through a water wet membrane at ambient temperature at 1.5 bar (22 psi): Through a water wet membrane at 23 °C at 1.5 bar (22 psi):
— ≤ 4.5 cc/min ≤ 7.5 cc/min ≤ 15 cc/min
Gravimetric Extractables After autoclaving and a 24-hour soak in ASTM Type 1 reagent grade water at controlled room temperature:
With prefilter: — — — ≤ 50 mg ≤ 45 mg
Without prefilter: ≤ 10 mg ≤ 15 mg ≤ 25 mg ≤ 20 mg
Bacterial Endotoxin Aqueous extraction contains < 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test.
Oxidizable Substances Meets the requirements of the USP Oxidizable Substance Test after a water flush of:
500 mL 1000 mL
Sterilization (with Prefilter)
Autoclaved: 3 cycles of 60 minutes at 121 °C. 10 cycles of 60 minutes at 121 °C
Steam Sterilization: Cannot be steam sterilized in-line. 10 cycles of 30 minutes at 121 °C
Hot Water Sanitization: — 30 cycles of 30 minutes at 80 °C
Sterilization (without Prefilter)
Autoclaved: 3 cycles of 60 minutes at 126 °C 30 cycles of 60 minutes at 126 °C
Steam Sterilization: Cannot be steam sterilized in-line. 30 cycles of 30 minutes at 135 °C
Hot Water Sanitization: — 30 cycles of 30 minutes at 80 °C
Total Organic Carbon (TOC)/Conductivity Autoclaved filter effluent meets the WFI requirement of USP<643>, for Total Organic Carbon and USP<645>for Water Conductivity at 25 ºC after a WFI flush of 11.5 L
Good Manufacturing Practices These products are manufactured in a Millipore facility which adheres to FDA Good Manufacturing Practices.
Non-Fiber Releasing Durapore membrane meets the criteria for a “non-fiber releasing” filter as defined in 21 CFR 210.3 (b) (6).
Component Material Toxicity Component materials were tested and meet the criteria of the USP<88>Reactivity Test for Class VI Plastics. Sterilizing-grade Durapore Filters are non-toxic per the current USP<88>Safety Test.
Indirect Food Additive Durapore membrane meets the FDA Indirect Food Additive requirements cited in 21 CFR 177.2910. All other component materials also meet the FDA Indirect Food Additive requirements cited in 21 CFR 177 – 182.
European Pressure Equipment Directive Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Equipment Directive, this product does not bear the CE mark. —

CVHL01TP3 CVHL02TP3  CVHL03TP3  CVHL01PP3   CVHL02PP3   CVHL03PP3  CVHL51TP3  CVHL52TP3 CVHL53TP3  CVHL51PP3  CVHL52PP3  CVHL53PP3 CVHL71TP3 CVHL72TP3  CVHL73TP3 CVHL71PP3 CVHL72PP3 CVHL73PP3 CVHL75PP1 CTGR01TP1 CTGR02TP1  CTGR03TP1 CTGR71TP1 CTGR72TP1  CTGR73TP1  CTGR75S01 KTGRA02FF3 KTGRA02HH3 KTGRA02TT3 KTGRA04FF3 KTGRA04HH3 KTGRA04TT3  KTGRA05HH1 KTGRA05TT1 KTGRA10FF1 KTGRA10HH1 KTGRA10TT1 CVGL01TP3 CVGL02TP3 CVGL03TP3 CVGL51TP3 CVGL52TP3 CVGL53TP3 CVGL71TP3 CVGL73TP3 CVGL75S01 CVVL01TP3 CVVL02TP3 CVVL03TP3  CVVL51TP3 CVVL52TP3 CVVL53TP3 CVVL71TP3 CVVL72TP3 CVVL72TP3 CVVL75S01 CVDI01TPE CVDI02TPE CVDI03TPE CVDI71TPE CVDI72TPE CVDI73TPE CVDI01TPS CVDI02TPS CVDI03TPS CVDI71TPS CVDI72TPS CVDI73TPS

默克Millipore密理博Durapore滤芯CVHL72TP3 CVGL72TP3 CTGR71TP1

1.00778.0001-Millipore默克简便总菌数霉菌两面培养片

发表于由

【简单介绍】

品牌 其他品牌

Millipore默克简便总菌数霉菌两面培养片1.00778.0001，10支/盒。Microbiology Cult-Dip combi.默克公司有各种微生物快速测试片。

【详细说明】

Millipore默克简便总菌数霉菌两面培养片
10支/盒。

储存和货运信息
储存 于 +15°C 到 +25°C储存.

规格
Microbial contamination no growth
pH-value
– TTC-Agar		 6.6 – 7.2
– Potato-dextrose-agar 6.3 – 6.8
Growth:TTC-Agar
– Escherichia coli		 growth/reddish colonies
– Proteus mirabilis growth/reddish colonies
– Klebsiella pneumoniae growth/reddish colonies
– Pseudomonas aeruginosa growth/reddish colonies
– Enterococcus faecalis growth
– Wild yeast (Strain 2) growth/reddish colonies
– Wild yeast (Strain 4) no/poor growth
– Penicillium commune ATCC 10428 growth
Growth:Potato-dextrose-agar
– Escherichia coli		 no growth
– Proteus mirabilis no growth
– Klebsiella pneumoniae no growth
– Pseudomonas aeruginosa inhibited
– Enterococcus faecalis no growth
– Wild yeast (Strain 2) growth
– Wild yeast (Strain 4) growth
– Penicillium commune ATCC 10428 growth

Millipore默克简便总菌数霉菌两面培养片

1.17927.0001 默克MERCK AS快速检测试纸（包括实验装置及试剂）

发表于由

【简单介绍】

1.17927.0001 默克MERCK AS快速检测试纸（包括实验装置及试剂）低量程：0.005 – 0.01 – 0.025 – 0.05 – 0.1 – 0.25 – 0.5 mg/l As

【详细说明】

1.17927.0001 默克MERCK AS快速检测试纸（包括实验装置及试剂）低量程：0.005 – 0.01 – 0.025 – 0.05 – 0.1 – 0.25 – 0.5 mg/l As