whatman囊式组织培养溶液过滤器

whatman囊式组织培养溶液过滤器

产品型号: Polycap Whatman
产品展商: 其它品牌


简单介绍
Whatman Polycap 一囊式组织培养溶液过滤器可以安全而有效地过滤要求严格的生物溶液和组织培养溶液。whatman囊式组织培养溶液过滤器 特性:·具有低蛋白吸附膜·高效预滤·预先灭菌·不要求任何昂贵的设备·比常规方法降低了喷溅和泄露的危险·可用一个滤器作为另一个滤器的预滤装置·可将样品直接过滤到常压容器中


whatman囊式组织培养溶液过滤器 的详细介绍

Whatman Polycap 一囊式组织培养溶液过滤器可以安全而有效地过滤要求严格的生物溶液和组织培养溶液。whatman囊式组织培养溶液过滤器
特性:
·具有低蛋白吸附膜
·高效预滤
·预先灭菌
·不要求任何昂贵的设备
·比常规方法降低了喷溅和泄露的危险
·可用一个滤器作为另一个滤器的预滤装置
·可将样品直接过滤到常压容器中

Polycap™ TC (PES) is available with and without a filling bell, they are disposable, dual layer polyethersulfone (PES) membrane filtration capsules that provide efficient filtration for critical aqueous solutions.

The PES membrane is inherently hydrophilic, has low extractables, is biosafe, has excellent flow rates and exhibits low protein binding.

Features and benefits

  • Polycap TC/PES 0.2/0.1, 0.2/0.2 and 0.8/0.2 µm capsules pass the HIMA Challenge Test for Sterilizing Grade Filters
  • 100% integrity-tested during manufacturing; results are correlated to microbial retention
  • Housing thermally fused (no surfactants or mold releasing agents)
  • Integrity-testable by bubble point, pressure decay or forward flow methods
  • Available in sterile and nonsterile versions with a filling bell option
  • Manufactured in clean room facilities under ISO Quality Systems
  • PES membrane protein adsorption characteristics:
    HSA 0.4 µg/cm2
    Insulin 2.0 µg/cm2
    Gammaglobulin 1.5 µg/cm2

Applications

  • Aqueous solutions
  • Biologicals
  • Buffers
  • Cleaning/rinsing solutions
  • Enzymes
  • High-quality water
  • Particle counting solutions
  • Pharmaceutical solutions
  • Reagent preparation
  • Salt solutions
  • Tissue culture media
  • Virus suspensions

 

Technical Properties – Polycap TC 
Housing Polypropylene 
Vent On inlet 
Membrane Polyethersulfone (PES) 
Support system Polypropylene 
Sealing Heat-fused 
Maximum pressure 4.1 bar (60 psi)
Flow direction If there is a prefilter, it is located on the inlet side and flow should follow arrows
Endotoxin level LAL tested, ≤  0.5 EU/ml 
Biosafety Materials pass USP Class VI 
Sterilization Certain filter devices have been sterilized.*
Capsule may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving.
(*sterile and non-sterile options offered)
Filtration area 36 mm capsule: 440 cm2 (72 in2)
75 mm capsule: 930 cm2 (144 in2)
150 mm capsule: 1900 cm2 (302 in2)
Water bubble point (final membrane) 0.1 µm > 3.2 bar (46 psi) 
0.2 µm > 2.7 bar (40 psi) 
0.45 µm > 2.1 bar (30 psi)
1.0 µm > 1.1 bar (16 psi)
SB – Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
1/2 SB – Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing
MNPT – Male national pipe thread
HB – Hose barb

 


Ordering Information – Polycap TC
Catalog Number Description
6714-3601 Polycap TC 36, 0.2/0.1 µm, sterile, with SB inlet and outlet, 1/pk
6714-3602 Polycap TC 36, 0.2/0.2 µm, sterile, with SB inlet and outelt, 1/pk
6717-3602 Polycap TC 36, 0.2/0.2 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
2622NS Polycap TC 36, 0.2/0.2 µm, with HB inlet and SB outlet, 5/pk
6714-3604 Polycap TC 36, 0.65/0.45 µm, sterile, with SB inlet and outelt, 1/pk
6715-3601 Polycap TC 36, 0.2/0.1 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6715-3602 Polycap TC 36, 0.2/0.2 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6716-3612 Polycap TC 36, 0.2/0.2 µm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk
6716-3602 Polycap TC 36, 0.2/0.2 µm, with MNPT inlet and SB outlet plus filling bell, 1/pk
6715-3604 Polycap TC 36, 0.65/0.45 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6715-3682 Polycap TC 36, 0.8/0.2 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6714-7501 Polycap TC 75, 0.2/0.1 µm, sterile, with SB inlet and outlet, 1/pk
6714-7502 Polycap TC 75, 0.2/0.2 µm, sterile, with SB inlet and outlet, 1/pk
2742C Polycap TC 75, 0.2/0.2 µm, sterile, with 1/2 SB inlet and outlet, 5/pk
2742M Polycap TC 75, 0.2 µm, with MNPT inlet and outlet, 5/pk
6717-7504 Polycap TC 75, 0.65/0.45 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6714-7504 Polycap TC 75, 0.65/0.45 µm, sterile, with SB inlet and outlet, 1/pk
6717-7510 Polycap TC 75, 1.0/1.0 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6715-7501 Polycap TC 75, 0.2/0.1 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6715-7502 Polycap TC 75, 0.2/0.2 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6716-7502 Polycap TC 75, 0.2/0.2 µm, sterile, with MNPT inlet and SB outlet plus filling bell, 1/pk
6718-7504 Polycap TC 75, 0.65/0.45 µm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk
6715-7582 Polycap TC 75, 0.8/0.2 µm, sterile, with SB inlet and outlet plus filling bell, 1/pk
6717-9501 Polycap TC 150, 0.2/0.1 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6717-9502 Polycap TC 150, 0.2/0.2 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6704-9502 Polycap TC 150, 0.2/0.2 µm, with 1 1/2" sanitary inlet and outlet, 1/pk
6717-9504 Polycap TC 150, 0.65/0.45 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6717-9510 Polycap TC 150, 1.0/1.0 µm, sterile, with 1/2 SB inlet and outlet, 1/pk
6718-9502 Polycap TC 150, 0.2/0.2 µm, sterile, with 1/2 SB inlet and outlet plus filling bell, 1/pk
6718-9582 Polycap TC 150, 0.8/0.2 µm, sterile, with 1/2 SB inlet and outlet plus filling bell, 1/pk